On Thu, Oct 1, 2009 at 9:47 PM, Don Hanson <dhanson928@gmail.com> wrote:
> Last week I was looking for a working odometer. �Found one on the Samba and
> got the whole cluster. �I also have a working tach from a diesel van that
> I'd like to get into the new cluster rather than the analog clock..........

> �But, where is a good place to take a signal for the tach? �Is there a
> rpm-based signal anywhere up front or do I need to go back to the coil or
> the alternator or the distributor and run a wire all the way up to the tach
> from the engine? �Mine is an inline four, but the alternator, coil and the
> distributor are the same as a WBX. �It has a Digifant II injection system.
> �Anybody know? �I

If no wire for tach signal up front....

1 of coil should supply the tach signal. 1 should be shown on coil itself.

Don't have my Vanagon Bentley handy, but pretty sure the tach also
needs + from 15 (ign. on position) and of course a ground.

Neil.

-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines