That's the thing Roger - the wires to the sensors themselves are not hooked
to anything the wires on the connector int he picture lead back to the
wiring harness.

I have the straight connector witht he rubber boot already on the sensor by
the push rod tubes but I am not sure where to connect the wire end - I'll
have to make a wire connector for the sensor behind the pulley - I just need
to know where it connects up top.

I'm fairly sure this is where those things hook up but I want to be sure.

On Tue, Oct 13, 2009 at 6:14 AM, Roger VanTill <motelvw@gmail.com> wrote:

> Jeff, check the ends of the sensor wires. On my motor the one behind the
> pulley has a 90 degree female end. The one under the pushrod tubes is
> straight with a rubber boot. I'll look for those other wires when it's
> light
> out.
>
>
>
--
Thanks,

Jeff
'90 Carat (Grover)
'86 (We call this one Parts)
'78 Bus (Melissa) Patty's Bus