I have one of these battery pullers that I bought when I was about 17.
When I used it to take a battery into my FLAPS about a year ago, the
kid behind the counter said "wow, where'd you get THAT?"

Jim

On Fri, Oct 16, 2009 at 7:50 PM, John Anderson <wvukidsdoc@yahoo.com> wrote:
> Actually I have seen a commercially made version of this once upon a time for sale somewhere, to make it a bit easier, had some sort of cam locking giz whizzes that slipped on the top post terminals of a top poster, then a non conductive strap between them, and you lifted it right up instantly without having to tighten anything.� Chris' idea to make one is exceptionally good though.� Me I just make a couple of hooks out of a heavy coat hangar, and hook idealy the little tabs that might be on the top for a lift strap that didn't fit, or less ideally the edge of the of the battery, then I cuss 5 or 10 times when I get it halfway up and it slams back down.� Chris's idea is an exceptional one to say the least, put a good heavy nylon rope in the "cable" areas of both clamps and voila, instant battery lifter.� I'll probably still be cutting up coat hangars to get mine out of the syncro next time though having forgot this all.
>
> John
>
> --- On Fri, 10/16/09, JordanVw@AOL.COM <JordanVw@AOL.COM> wrote:
>
>
>
> as far as being stuck, its prolly stuck on the cables jammed down at the
> sides..���you can buy battery removal straps, those are great if there is
> something to hook it onto..sometimes the batteries have provisions for the
> straps.., i just made one myself.. i used the clamp on battery terminal clamps
> from old battery cables, cut the cables off, and tie a nylon rope between
> them.� then clamp them to the terminals, then lift the rope..� make sure you use
> a ROPE though..� :)
>
> chris
>
>
>
>
>