At 10:11 PM 10/17/2009, Scott Daniel - Turbovans wrote:
>I also don't run lots of ground wires into one ground wire.
>Subaru's can have 8 ground wires in the ECU harness, or whatever
>........whatever they do, I do, as much as possible.
>in electronics...........at least us half normal people..........we don't
>really know much about electronics, and you could  sure get some WEIRD
>glitches that you  could never nail down .......so best policy there, is to
>just try to keep it stock, as close to factory as you can get it.  Then

Boy, you said a mouthful there!  In a perfect world it might be easy,
but in this world everything has resistance and everything that has
current passing through it develops a voltage difference across
it.  If <MFR> put eight wires in a harness that all lead to common --
*especially but not exclusively* if they lead to different places on
the chassis -- there may very well be an electrical reason for it,
and if you don't thoroughly understand that reason it could cause you
unending irritation and problems if you change it, even to the extent
of changing where on the chassis it goes.  Obviously you have to do a
certain amount of the last when doing an engine conversion.

Yrs,
d