Checking the wiring is simple enough. Just unplug the connector from the
ECU.
Then with you ohm meter you change check the wiring and the connection to
the
temp 2 sensor. Have you already cleaned up the grounds on the left side
of the engine compartment? That bunch of ring connectors grounds quite a bit
and should be kept pretty clean.

B.

On Sat, Oct 24, 2009 at 5:17 PM, Jim Arnott <jrasite@eoni.com> wrote:

> It would change the pulse duration on the fuel injectors.  GIGO
> principle.  Garbage in, garbage out.
>
> Jim
>
>
>
> On Oct 24, 2009, at 1:41 PM, Rico Dagastino wrote:
>
> Does anyone have advice on how a broken wire or a short to ground
>> for the
>> temp II sensor would affect engine RPM?
>>
>