hi roger..i dont have any pics but you simply mount the jumpseat mount that
attaches to the battery box first,   then drill holes in the floor where
the jumpseat feet touch the floor and thats where you install the oversized
allenhead bolts thru the floor.

In a message dated 11/4/09 3:54:28 AM Eastern Standard Time,
rogerwhitt1@GMAIL.COM writes:

> any pictures available regarding this
>
> On Tue, Nov 3, 2009 at 7:26 PM, <JordanVw@aol.com> wrote:
>
> > In a message dated 11/3/2009 3:22:04 P.M. Eastern Standard Time,
> > billmonk@GMAIL.COM writes:
> >
> > He used  a two large allen bolts and then bolted them to the
> > floor.
> > He then  drilled the head out to accept the legs on the bottom of the
> seat.
> > He said  he got the bolts at the local hardware store.
> >
> >
> > i agree. this is the easiest safest way to install mounts in the floor
> for
> > the jumpseats.
> > . i used to cut the floor mounts off donor carats and then weld them to
> the
> >  floor but this is way easier...
> >
> > chris
> >
>
>
>
>