

| Subject: | Re: 4-way flashers, halfway |
| From: | miguel pacheco |
| Date: | Mon, 23 Nov 2009 10:07:59 -0700 |
First thing that comes to mind is cleaning all the contacts (at the bulbs, both ends of harness for each and relay.) Miguel On Sun, Nov 22, 2009 at 4:39 PM, Don Hanson <dhanson928@gmail.com> wrote: > I had the same problem with my flashers and it cleared itself up somehow. > No fault with the turn signals or the parking lights or brake lights..just > the left side E-flasher not working front and back...Walked away and came > back...everything working...Huh? must be the switch..I have another that > maybe I will swap in just for fun... > Don Hanson > > On Sun, Nov 22, 2009 at 12:39 PM, Allan Streib <streib@cs.indiana.edu>wrote: > >> Stephen Grisanti <bike2vcu@YAHOO.COM> writes: >> >> > I had occasion to use the flashers yesterday while jockeying three >> > vehicles among two parking spaces and noticed that the left (driver's) >> > side lights were not working. Figuring the turns signals were out I >> > tested them and found both right and left side turn signals work, each >> > side blinking normally but not both together when in the emergency >> > mode. Has anyone encountered this on his/her van and isolated the >> > cause of the problem? >> >> I don't know how they are wired but I'd suspect the flasher switch. It >> is a switch that is rarely used, so it's possible that it has corroded >> internally and is not closing all the circuits that it needs to. >> >> Try operating the switch a few dozen times and see if the problem clears >> up. >> >> Allan >> -- >> 1991 Vanagon GL >> >
Have something to add on this topic today? Revive this thread in the forum »