At 05:53 PM 12/4/2009, mordo wrote:
>Long story short, I have since not been able to start the engine without
>coaxing the throttle a bit. It will not hold idle when cold. After coming up
>to operating temp, it will idle but at about 850 rpm and a little bit lumpy.
>My question of the collective experience is: what is the most likely
>component to cause this condition under the conditions described above? BTW,

I'd unplug the idle stab board and make sure its connections are dry
and clean.  If that's not the problem I'd follow the procedure that
John Rodgers posted here a while back for thoroughly checking out the
idle stab system.

Yours,
David