

| Subject: | Re: Power window on drivers side not working need advice |
| From: | BenT Syncro |
| Date: | Mon, 7 Dec 2009 14:13:55 -0800 |
Probably a short likely inside the rubber boot by the hinges. BenT Sent from my mobile device On Dec 7, 2009, at 1:43 PM, Robert Stewart <robertmstewart@MAC.COM> wrote: > So up until about a month my drivers side power window worked. I had > the motor pulled and reconditioned by my mechanic this summer so they > should not be the issue. > > The drivers side unit worked no problem, went on vacation and when I > came back the drivers side window worked but the next day it did not. > The switch felt a little hot though the last time I used it. I may > have over-soldered it. > > Anyway the drivers side window still works fine. > > I bought a replacement set of drivers side switches, and the drivers > side window still does not work. > > I test both switches and since I new the passenger window system > worked from the leads on the drivers side I put the drivers side on > the passenger side switch wiring and it worked fine. > > So now I have deduced that it must be something with the wiring on the > drivers side window or a fuse. > > Any ideas? > > Is there a separate fuse for the drivers side window switch and > another for the passenger side? > > Thanks in advance. > Robert > NY
Have something to add on this topic today? Revive this thread in the forum »