> Considering the recent discussion on headlights, I documented my
> conversion to the South African configuration on my website. �I hope
> this might be helpful for those of you considering various alternatives.
> http://www.qadas.com/~kanas/Vehicles/Syncro/Syncro_Index.html
>
> *Best Regards,
> Jon

Good!

Two suggestions:
1) Fit a high-beam relay. You'll be running 4 filamentss instead of 2,
loading the wiring.
2) when trying the grill and inner lights for fitting, do ONE light at
a time... or risk fumbling and dropping one of the lights.

For the light drilling, someone could post exact measurements of the
hole-spacing ask someone for the hole-spacimg and measurements to the
nearest distinct feature on the grill opening (eg body seam) to
eliminate the need for folk to have to work out by trial where the
holes should go.

Sudhir, if yours is that far out, why not redrill? Plenty of metal
between the bad holes and the spots they should go.

-- 
Regards
Andrew Grebneff
Dunedin
New Zealand
Fossil preparator
Mollusc, Toyota & VW van fan