

| Subject: | Re: Rear window washer line problem |
| From: | miguel pacheco |
| Date: | Wed, 3 Mar 2010 17:49:05 -0700 |
I've used Scott's method, repeatedly. Just a piece of flexible hose to join the two and a dab of silicone sealant at either end to assure that the tubing doesn't migrate. Miguel I have not failed. I've just found 10,000 ways that won't work. - Thomas A. Edison On Wed, Mar 3, 2010 at 2:24 PM, Jonathan Berg <jonbergga@gmail.com> wrote: > I had to cut my line last year. I found a small tubing or vacuum > splice at the FLAPS that bridged the gap. I think was from a variety > pack and I used tie wraps to seal the deal. > > I investigated running new tubing and possibly additional electrical > leads, but ended up cutting to fit, painting to match. > > jb > > On Wed, Mar 3, 2010 at 3:45 PM, Scott Daniel - Turbovans > <scottdaniel@turbovans.com> wrote: >> I suppose shrinkable tubing could work, >> but why not a small piece of rubber hose to join the two broken plastic >> parts ? >> Thin-wall hose so it's not to large OD. >> >> >> ----- Original Message ----- >> From: "John Graham" <theklube@GMAIL.COM> >> To: <vanagon@GERRY.VANAGON.COM> >> Sent: Wednesday, March 03, 2010 11:36 AM >> Subject: Rear window washer line problem >> >> >>> 88 Vanagon Camper - In preparing for our first camping trip of the season >>> last week, when I opened up the rear hatch, I noticed that the small >>> plastic >>> tube that conveys the WW fluid from the body to the rear hatch had snapped >>> in two. >>> >>> Normally (or originally) the tubing and the wires to run the rear wiper >>> are >>> enclosed in a little flexible sleeve - this sleeve has crumbled over the >>> years - rear wiper still works though. >>> >>> So my question - Since the tubing seems pretty brittle and I don't think >>> it's under much pressure anyway, could I get away with just mending is >>> with >>> some heat shrinkable tubing to connect the two ends? If the joint leaked >>> a >>> little it shouldn't matter as it would be in the 'outside channel' around >>> the rear hatch. >>> >>> Are there any members who've made a simple repair in other ways that I >>> should consider? >>> >>> Thanks, >>> >>> John Graham >>> 88 Westy Charlotte, NC >>> >>> -- >>> Don't you wish there was a knob on the TV to turn up the intelligence? >>> There's one marked 'Brightness,' but it doesn't work. >> >
Have something to add on this topic today? Revive this thread in the forum »