I guess I could try venting to the cargo area under the truck bed.  I
replaced the seals on the treasure chest doors too, so it might be pretty
airtight in there as well.

Although, I really hate cutting holes in the body.  Even if it's out of
sight.

Cheers, 

Jeff

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
chris and/or ruth
Sent: Sunday, March 07, 2010 11:23 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Vent Question

Jeff,
Ford Pick-ups have�one way rubber vents on the back of the cab--covered by
the box or service body. They are about 4x8". The Tristar is a Doka, right?�
Not sure if you have a hidden area for a vent like this.� I have turned on
my vent fan�to high in my company truck and observed the rubber vents open
from this pressure.
Chris C
�
----------------------------------
�
Subject: Vent Question

Looking for some insight.� the seal is so good on my Tristar that it is a
pain to get the door closed without slamming it.� If you roll the window
down an inch, the door closes easily.� I've been trying to think of a good
way to create a pressure release, but so far I've come up with nothing.� Any
ideas out there in Vanagon land?

Cheers,

Jeff