Thanks to all for the info.  I like the socket version.  Is there enough
clearance to get to the filler?  Gonna get it uo on the ramp in a minute.
Thanks again.
Michael in San Antonio
91GL AT 'Gringo'
73 Beetle

On Sun, Mar 14, 2010 at 11:48 AM, Paul Guzyk <paullist08@guzyk.com> wrote:

> 17mm
> you can get a purpose built socket tool like this;
> http://www2.cip1.com/ProductDetails.asp?ProductCode=ACC%2DC10%2D7165
>
> or
> find a 17mm allen wrench, cut about 1 inch off with a bandsaw/cutting wheel
> then use the stub along with standard 17mm wrench/socket to get the plugs
> out.
>
> or
> you can weld a 17mm nut to a short 17mm bolt if you have a welder and make
> your own tool.
>
> Always good idea to loosen fill plug first, make sure it is not seized
> before you drain all the fluid and find out no easy way to put new fluid in.
>
>
>
>
>
>
>
> ---------- Original Message ----------------------------------
> From:         Michael Sullivan <sandwichhead@GMAIL.COM>
> Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
> Date:          Sun, 14 Mar 2010 11:36:19 -0500
>
> >Can anyone tell me the size of the drain plug and refill plug?  Auto.
> >Thanks.
> >Michael in San Antonio
> >91GL AT 'Gringo'
> >73 Beetle
> >
>