On Sat, Mar 27, 2010 at 2:21 PM, Michael Sullivan
<sandwichhead@gmail.com> wrote:

> I'm using 20PSI� just sayin

Good to know.

I used lower pressure as I could hear reservoir stretch when
pressurizing. But my method was to pressurize tank, check pressure,
slowly open wand valve. Last session I left valve open and pumped tank
to pressurize reservoir. Seemed easier on reservoir.

My general recollection was that people used 15 PSI. While watching
stream, I saw no difference in flow rate to rears with 10 PSI or 15
PSI. I settled on 12 PSI. But watching the stream is hardly
scientific.   ;)

Maybe I could try a higher pressure.

Neil.

-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines