There's lots in archives, but a few points.

If tank has square regulator, it's likely original. IF it's leaking,
the copper line(s) need to be changed to accommodate the newer round
type.

While inspecting things, look for an ID tag on the tank. Is it there?
Super rusty? Is it welded to tank at corners only? IF so...

Tons in archives re: refurb or replace and old tank. Pics of my old
tank tag and pitted metal found under tag:

http://picasaweb.google.com/musomuso/PropaneLPTank#

NOT saying tank itself is leaking, and don't want to start a thread on
tank refurb. Just showing how mine looked, and what I did.

I have read that the auto-fill valve can be problematic. IF yours has
an auto-fill, maybe stuck slightly open?? Info should also be in
archives.   :)

If tank has a manual fill, did LP jockey close it fully?

Be aware that LP can freeze burn flesh. That's why the LP jockey wore
gloves. Not trying to scare anyone. Just a warning.  :)

Neil.

On Mon, Mar 29, 2010 at 10:35 PM, Aimee MacLeod
<emeraldcityrealty@gmail.com> wrote:
> Ok, so half the time I can't follow what you guys are all talking about but
> I sure have learned alot so far from what I do get on this chat line and I
> really appreciate your insight.
>
> Another question I hope you can help with for my 82 aircooled ( I actually
> think the engine is a rebuild from an 83.5). �Thanks in advance.
>
> I got the propane filled for the first time the other day, a full
> 2.5gallons...so I assume it was on empty. �Started up the stove, works
> great. �So now, it smells like there is a leak outside the van. �No smells
> inside, thank goodness, but I guess it must be leaking out slowly. �I turned
> it off but still getting the smell. � Is this fixable or does it indicate I
> need new tank??
>
> --
> Best regards,
>
> Aimee in Oly
>

-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines