

| Subject: | Re: auxillary fuse panel |
| From: | Steve Williams |
| Date: | Wed, 7 Apr 2010 07:24:52 -0700 |
At 12:04 PM 4/6/2010, Alistair Bell wrote: >... a handy auxillary fuse panel ... I've been procrastinating for months on installing a fuse block in my Westy. I have all the parts. Just need to get to it. I got the fuse block from B&C Specialty Products, who sell various hard-to-find parts to the aircraft home-builders. They have spade fuse blocks from six to 20 positions: http://www.bandc.biz/circuit-protective-devices.aspx And I have one of their ground blocks, too. No more "bad ground" problems! http://www.bandc.biz/groundblock24-tab.aspx Finally, I bought an aircraft volt/ammeter and a shunt for each battery, so I can see the charge/load current more precisely: http://www.aircraftspruce.com/catalog/inpages/westduals10.php To protect the wires from the shunts to the ammeter, I'll use B&C's low-current fusible links, a handy alternative to the four (!) fuses that would otherwise be required: http://www.bandc.biz/fusiblelinkkit24-20awg.aspx
Have something to add on this topic today? Revive this thread in the forum »