

| Subject: | Re: Swepco for the tranny |
| From: | Luke Bakken |
| Date: | Fri, 9 Apr 2010 09:20:49 -0700 |
On Fri, Apr 9, 2010 at 8:37 AM, Don Hanson <dhanson928@gmail.com> wrote: > �Anyone use Swepco gear oil in a manual trans van? �What kind is right? > Been using Redline MT 90 in my 5-speed..been in about 30k now since my last > change and I was wanting to try that Swepco in this one. �I used that in my > racecar (Porsche) with a pretty tricked-out gearbox and limited slip and it > seemed to perform even better than the Redline I also used at times. > > �I want to 'treat' my tranny well...it's a great asset to my inline four > 1.8-liter VW gas motor and I can't afford to have any problems with it right > now...so.. Here's what Daryl says: "We suggest the use of Redline MT90 synthetic oils for most units with stock engines. We recommend Swepco, LE or a similar high quality racing type gear oil for any engine over 160HP or that has severe off road usage." From: http://www.aatransaxle.com/Warranty.htm I put Swepco 203 in my syncro trans after he rebuilt it - I have a2.5L subaru so I thought that would be a good idea. Definitely takes longer to "warm up" than the MT-90 did. Also see: http://www.google.com/search?hl=en&q=site:thesamba.com+%22swepco%22+203+OR+201
Have something to add on this topic today? Revive this thread in the forum »