At 03:01 PM 4/9/2010, John Rodgers wrote:
>The rear pressure sensor is leaking. It is a PITA location and I can't
>get to it with anything I have. 24mm deep socket to cleat the switch
>(like a spark plug wrench) doesn't leave me enough room to get a driver
>in there to turn the socket. A shorter socket doesn't clear the end of
>the switch.

I did this recently with a deep socket from Advanced Auto and a
breaker bar.  Worked a treat.  Seems to me I had the water pump
pulley off at the time because I was replacing also the cooling pipe
that goes forward to the thermostat; don't remember if that made any
difference to getting the sender out -- possibly better visibility.

Yours,
David