But did you pressure bleed the clutch? Mine would not bleed successfully
without the pressure bleeder - pumping had no effect, and the clutch felt
like the MC or slave had failed.

On Sun, Apr 11, 2010 at 10:44 AM, Kurt Grotz <kgrotz@craftech.com> wrote:

> I did drain and add new fluid and problem still exsists.  Sorry about the
> mis-email.
>
>
>
> -----Original Message-----
> From: Eric Ley [mailto:eric_ley@hotmail.com]
> Sent: Sunday, April 11, 2010 1:08 PM
> To: Kurt Grotz; vanagon@GERRY.VANAGON.COM
> Subject: Re: Clutch not working.
>
> I would check the level in your master then rebleed system to see if that
> help's
>