Whoaaa!
You guys have me confused now....
Chris says all you have to do is just swap out the relays, and someone else says you have to do something to the wiper stalk?
What's the whole story?
Thanks, Anthony'89 Syncro GL (Hidalgo)

--- On Wed, 4/21/10, jordanvw@AOL.COM <jordanvw@AOL.COM> wrote:

From: jordanvw@AOL.COM <jordanvw@AOL.COM>
Subject: Re: Intermittent wiper Relay ?
To: vanagon@GERRY.VANAGON.COM
Date: Wednesday, April 21, 2010, 8:49 AM

-----Original Message-----
From: Thomas Buese <tombuese@COMCAST.NET>
To: vanagon@GERRY.VANAGON.COM
Sent: Tue, Apr 20, 2010 11:36 pm
Subject: Re: Intermittent wiper Relay ?

whats the issue here?� you simply remove your existing #19 wiper relay and install the #99 one� in its place, and use the wiper stalk to set the intervals. 

Mr. Bentley says that it is an option on my year & shows how to 
install the option if it is not ordered that way from the factory by 
pulling the plastic piece, but of course assumes that I know how to do 
that? 
 
Maybe tomorrow? 
 
Tom-I love plug & play, kinda like big tires? 
 
On Apr 20, 2010, at 8:08 PM, Richard A Jones wrote: 
 
> Tom: 
> 
> In my '81, when I bought the "19" relay many years ago, I was 
> disappointed, after I removed the plastic wedge, to find I 
> still had no intermittent wiping. 
> 
> Closer look at the wiper switch and I saw that it was NOT wired 
> to do it. So in '81 they wired vans for "with" and for "without" 
> intermittent. Or maybe it was the fuse panel that had no wires 
> "behind" where the "19" plugged in. 
> 
> I'm assuming that at some point they gave up and wired them 
> all for "with", but where does Detlev fall? 
> 
> Hope it's not "before" 'cause you'll love playing with the 
> operation of the "99" module. 
> 
> Richard