Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Water Cooler System Design Flaw Workaround?
From:Tobias Gogolin
Date:Sat, 24 Apr 2010 21:06:58 -0700

Yes the sensor was so grimy, after cleaning it the flasing and runaway
instrument went away!
I also tied the Bong loading for my van and it works great!
However now that i did a bit longer testdrive I find it still overheats and
finally I notice I used to hear the radiator fan even after parking! I
havent heard that fan for weeks and I havent noticed! How should I
troubleshout it where are the relais or fuses please!? Thanks!

'84 Automatic

On Thu, Apr 22, 2010 at 8:29 PM, David Beierl <dbeierl@attglobal.net> wrote:

> At 11:29 PM 4/22/2010, Tobias Gogolin wrote:
>
>> >If you have more than about 180k across the pins it will set off the
>> low-coolant alarm after a few seconds
>> Is that the sensor on the reservoir?
>>
>
> Yup.  Let me know if you want to know how it works.
>
> d
>

--
Tobias Gogolin
Tel. Movistar (646) 124 32 82
Tel. Telcel (646) 160 58 99
skype: moontogo
messenger: usertogo@hotmail.com

Blog: http://zeitgeistensenada.blogspot.com/

You develop Sustainable Ranch Technology at
http://tech.groups.yahoo.com/group/SURA-TECH
an Open Source Electric Motor/Alternator at
http://groups.yahoo.com/group/Performance_Axial_Flux
and an Open Source Motor Controller at http://groups.yahoo.com/group/GoBox