Nice work!  As you pointed out this wll help with resonant sound
transmission. You may want to consider some closed cell foam material
to help reduce sound waves which do get sufficiently reduced by
dampening panel movement.

2010/4/23, Michael Sullivan <sandwichhead@gmail.com>:
> Still have the slider to finish, but here are some before and after pics.
> Bought 6 rolls($100) and will have just a little bit left. That will do both
> front doors, front cabin area, slider, and panel behind driver(opposite the
> slider).  Tips: Don't attempt on a really warm day. Don't atempt on a really
> cold day. Heat gun really sets the material and will be a real PI to
> remove.  Almost felt bad covering the pristine white panels in the back
> area.
> BTW-If you have ever gotten your hand up inside the candy or soda vending
> machine, you will have no problem with the door panels.  If you are a
> ham-fisted oaf, you know who you are, then don't try it.
> http://picasaweb.google.com/sandwichhead/45010101?feat=directlink
> Michael in San Antonio
> 91GL Weekender AT 2.1L 'Gringo'
> 73 Beetle
>

--
Chris S.
"No solution is too complex to be executed incorrectly"