

| Subject: | Re: OK, Swepco gear oil.. |
| From: | Mike S |
| Date: | Thu, 22 Apr 2010 12:11:03 -0400 |
At 11:37 AM 4/22/2010, Don Hanson wrote... >I just changed-over from MT-90 Redline to Swepco 201 in the gearbox of >my >5sp manual tranny. Here are my impressions. > > The two are very different. The Redline has the consistency of > light >motor oil or maybe even power steering fluid...very 'thin'. The >Swepco is >more the consistency of molasses. Really "messy" stuff. When you lift >your >fingers out of a puddle of the Swepco you get these little "threads" >coming >off...they blow away like cobwebs. Very 'sticky-feeling'... I was >working >in about 45f temps. I also have some Valvoline 80w-90w Gear Oil on >hand. >That seems to be right between the two in viscosity. MT-90 is a 75W90 gear oil (viscosity about the same as a 15W40 motor oil). Redline MTL is thinner, a 75W80W. Are you sure you weren't using the MTL? You don't say which Swepco product you used. I think the Porsche folks mostly use their 201, which is available in multiple grades, up to a 250! Their 210 is an 80W-140, which sounds closer to what you describe.
Have something to add on this topic today? Revive this thread in the forum »