Roughly 23mm x 64.5mm with a 15mm hole. Easy enough to take a fender washer
and a long allthread that will fit into the threads in your slide puller.
put the allthread through the hole and the washer (on the far end of the
wrist pin) and thread on the bolt.

Jim

On Fri, May 21, 2010 at 1:32 PM, Tom Lambas <twlambas@gmail.com> wrote:

> Does anyone have the dimensions for the stock 2.1 wrist pins? I'll be
> making
> a puller in the next couple of days.
>
> Thanks, Tom
>