At 03:56 PM 5/23/2010, Zoltan wrote:
>I installed a fuel pressure gauge to see if the pump comes on at
>all, but no fuel pressure.  I have spark though.  I'm not sure if I
>have injector action too.  I would need to check that, but it's
>futile until I have the gas going.
>The question is; what are the things to check in this case?  I have
>looked into the archives but I'm loosing patience with it.
>This is a 1.9 system with a 2.1 engine.
>Zoltan

First check the fuel pump +12 connector (single connector near the
vapor-recovery vacuum valve at front-right.  If it's plugged in and
you have +12 there for a couple seconds when you turn the ignition
on, then the problem is that wire/connector, the connections at the
pump, the pump itself and the ground wire to the frame rail.  Should
have +12 all the way to the pump, ~0 from pump to ground terminal.

Otherwise it's an ECU relay/fuel pump relay sort of thing, and I'm
not going to sort out the schematics until I'm sure you need it.

Yours,
d