Hi All,

I just developed a leak on my power steering rack. Its coming from the seal
on the part (pinion shaft?) right near the universal joint. Here's a photo
with arrow pointing to the leak.
http://picasaweb.google.com/sorkilmo/PowerSteeringRack#5475166135610697538

I am wondering if it is possible to just replace this seal, possibly without
removing the steering rack?
One of the boots was always a bit wet so its likely that the rack is due for
new seals all around anyway.
I am thinking of just buying a new rack and installing it myself.
I am wondering if this is something that a fairly competent backyard
mechanic can do?
Do I need to go and buy some special tie rod remover tools?
Is this a good guide for doing the work?
http://www.vanagonauts.com/Another-Steering-Rack-How-to212.htm
Other than rusted on hardware is there anything else that might be tricky on
this job?

This is the second time this month that just after arriving home from a long
trip I find something leaking. I am grateful to the Vanagon gods for keeping
my repairs from being on the side of the road. I also never leave a parking
spot now without first checking the ground underneath for wet spots.

Thanks
Greg S.
87' Wolfsburg Hardtop
Ottawa ON