yeah,. and if you want to take that sometimes annoying sucker out of the
picture for a while....
you just put a resistor of almost any value in place of the level sensor.

----- Original Message -----
From: "David Beierl" <dbeierl@ATTGLOBAL.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, May 25, 2010 12:46 PM
Subject: Re: Blinking coolant level light

> At 03:04 PM 5/25/2010, John Meeks wrote:
>>The spec is (with probes in the coolant) between 31K Ohm and 65K Ohm. I
>
> In reality, anything between a dead short and roughly 180K ohms will
> keep the controller from triggering.
>
> Yrs,
> d