> I have an EJ22 Subaru engine in my automatic, 89 vanagon. I am using
> Audiovox CSS -- 100. I have some questions about the hookup, as I've been
> running the unit with a tach only signal, and I'm told from Audiovox it
> requires a VSS and Tach signal to work properly (automatic).

I have an automatic Tiico, and a CCS-100 with a vacuum reservior I got
from a junk yard Volvo (I might do a better job with this if it gets to
the top of my list of things to do).

You do need the VSS, as the tach feed can't cope with the torque converter
changing the revs to suit the speed.

You need to set it up as a _front_ wheel drive, ie 2 magnets.  I then used
the following switch settings:

1 - off
2 - off
3 - on
4 - off
5 - on
6 - off
7 - on

Works just fine now, as long as I don't turn it on before the thing's in
3rd gear (the gear change will disengage it as the revs drop off).

toodle pip,
--
       Dug Smith         | Terry Pratchett: It's almost
(mailto:dug@dugbert.com) |  impossible to ride a rock and roll
(http://www.dugbert.com) |  motorbike and stay on for three verses.