Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Radiator in- replacing coolant question
From:Jake de Villiers
Date:Fri, 4 Jun 2010 14:05:41 -0700

Absolutely.  I open the rad bleeder a little first so that any air can
escape, then squeeze the big hoses in the engine compartment with my hands.
That will usually drive out some air and you can refill the header tank
before starting it up.

Dennis gave some good bleeding tips here just the other day...

Good luck, jake

On Fri, Jun 4, 2010 at 12:57 PM, B Feddish <bfeddish@netreach.net> wrote:

> OK, the radiator is in. Both coolant bottles in the back are still full so
> when do I add the replacement coolant?  Do I start it up and let the
> overflow bottle empty out?
>
> Thanks,
> Bryan
>

--
Jake

1984 Vanagon GL 1.9 WBX 'The Grey Van'
1986 Westy Weekender/2.5 SOHC Suby 'Dixie'

Crescent Beach, BC

www.thebassspa.com
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27