one word... tubes

have a look at what I did to make one:

http://shufti.wordpress.com/2010/02/28/multi-prong-connector-tool/

but you don't need to go to all that bother, find some thin wall
tubing, maybe hobby shop brass stuff?

alistair

On 7-Jun-10, at 6:23 PM, John Reynolds wrote:

What's the trick to removing the metal part of a connector (with
wire) from within a plastic connector on a VW?   This connection is
the round one that feeds the heater blower for those who had been
there before.
I heard to use a small flat blade screw driver, but I can;t seem to
get it to go.  Searched the archives to no avail - yet I know it's
probably in there
JohnLiMBO