Just pop the "horn" off (pull on it from the top) but hang onto it. It is
connected by a female
plug/wire and you'll have to pull that off before you can set the long horn
aside. I think I use
about a 20-22mm? socket and 1/2" drive breaker bar to loosen the nut. Once
that's off, pull on the
wheel side to side, top to bottom and it should just come right off.

Oh, get the front wheels as straight as possible so you can just slide the
S/wheel back on
in the correct orientation.

bob

On Wed, Jun 9, 2010 at 11:33 PM, Craig Morton <rangermorton1972@yahoo.com>wrote:

> My rack is in and darned if I didn't get  the steering wheel out of kelter.
> What is the easiest way to get it aligned again?
>
> Thanks.
>
> Craig
>
>