Thanks Mike, I have now emailed GoWesty support service.

If anyone has any experience with these things that will help, I'd be happy to hear something.

David

---- Mike South <msouth@GMAIL.COM> wrote:
> Did you try gowesty's support email?  They were pretty responsive for me
> when I had a problem with an install.
>
> mike
>
> On Thu, Jun 10, 2010 at 5:06 PM, Dave Mcneely <mcneely4@cox.net> wrote:
>
> > in my '91Volkswagen Vanagon GL Campmobile with GoWesty 3-point (shoulder
> > and lap) belts.  When I put the bolts in on the receiver end (under the
> > seat), the bolts would not go all the way in, but became very tight long
> > before reaching the end of their travel.  The attachment points to the body
> > in the middle of the belts worked fine, but those had spacers.  I saw no
> > spacers for these bolts, but they act as if there should be.  They were
> > fully tight to the end of travel, holding the fittings tightly in place
> > before, but now they do not tighten down properly.  they just become tight
> > but not snug up to the fittings.  I suppose I could have lost spacers, but I
> > sure did not see any.  Any help that anyone can offer before I take this to
> > a professional?  I don't want to have anyone sit back there with the
> > fittings not snugged down.
> >
> > I realize that I did not need to remove the receiver ends, but I did, and
> > now I have this situation.
> > --
> > David McNeely
> >

--
David McNeely