Megasquirt is not proprietary.
It can function with any sensors- properly calibrated.
Default is GM sensors.  You can get GM pigtails with weatherpack connectors
new for cheap.  The GM sensors are cheap too and supposedly more accurate
than Bosch.
Example: IAT with pigtail for $18...
http://tinyurl.com/26a52ya

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Scott Daniel - Turbovans
Sent: Sunday, June 13, 2010 5:30 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Electrical Connector dust boots

dielectric grease.
that'll do the same job quite well.

officially a rubber boot would be part on an entire wiring harness..so not
something you normally get easily.

though there are companies that specialize in aftermarket ECU wiring harness
and such ..
and they might have individual connectors you can buy and rubber boots for
them.

What does Bostig use ?
or Megasqirt, for example.

----- Original Message -----
From: "Evan Mac Donald" <evanm@ATT.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 13, 2010 1:13 PM
Subject: Electrical Connector dust boots

I am trying to fix up the most egregious problems in my engine compartment,
and some of the electrical connections fall into this category. I lost an
injector, to corrosion eating the tabs! I am trying to find new replacements
for the rubber parts of the two-lead connectors that are all over our
engines - injectors, TPS switch, etc. Anybody know what I mean, and where to
find them? I have searched, using all kinds of variations, but no luck so
far...

Thanks to all!
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.829 / Virus Database: 271.1.1/2926 - Release Date: 06/13/10
15:45:00