

| Subject: | Re: I'm fixing a hole [in the fresh water tank] |
| From: | David Beierl |
| Date: | Fri, 18 Jun 2010 16:48:55 -0400 |
At 04:37 PM 6/18/2010, Mike \"Rocket J Squirrel\" wrote: >All's I knows now is that the tank will overflow and drip down out >the bottom. Which isn't good. > >What makes it extra puzzling is A) where does that vent hose hit the >outside world, and 2) how could it work anyway since it exits the >tank on the top and goes through the interior paneling a couple >inches higher than the top of the tank. This latter factoid suggests >that there were not to be any leaks on the tank topside. Thus my >desire to fix the leaky grommet. My '84 never leaked, no problemo. And as you say, the water would sit in the overflow hose until you used a cup or so. >As you say, I could break down and replace it -- haul up the >(aftermarket, GoWesty, I think) pump, see which end of the wire is >easiest to disconnect (please let it be the pump, please let it be >the pump) and thread on a new grommet. Cut and splice if you have to -- it isn't NASA-critical. Incidentally, if when you replaced the pump you didn't keep the big white wire that was tight in the grommet... d >Or just mash a big bunch of chewing gum over the grommet and be done with it. > >A containment dome - that's what I need.
Have something to add on this topic today? Revive this thread in the forum »