

| Subject: | Re: While replacing steering rack..... |
| From: | Scott Daniel - Turbovans |
| Date: | Mon, 28 Jun 2010 19:46:42 -0700 |
re I had an "old time" alignment shop work on it, and they couldn't correct the 1.5 degrees of negative camber. Did they know about camber adjustment via the eccentrically mounted upper A-arm inner long bolt ? That directly adjusts camber of the front wheels. 12mm allen is the wrench I think. ----- Original Message ----- From: "Jack R." <jack007@COMCAST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, June 28, 2010 6:06 PM Subject: Re: While replacing steering rack..... > Ryan, > > I did my PS Rack last year, as well as tie-rods. Didn't do the upper ball > joints. My 84 Westy started leaking as well, and I think that they are > only > good for 25 years!!! > I had an "old time" alignment shop work on it, and they couldn't correct > the > 1.5 degrees of negative camber. > > So, call around and find a shop that knows Vanagons!!! > > Jack > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Bill Shawley > Sent: Monday, June 28, 2010 8:08 PM > To: vanagon@GERRY.VANAGON.COM > Subject: While replacing steering rack..... > > So it appears I'm not alone with a leaky power steering rack this summer, > maybe I never paid attention to the posts before but it sure seems like a > lot folks are having issues this year. Anyways..... got a used unit for > a > good price I'm going to install (worst case scenarior I have a core > sitting > in my garage if replacement is necessary sooner than alter). I also plan > to > replace upper ball joints (ripped boots, tight joint so far), and the tie > rod ends (ripped rubber), I already have new rack bushings and power > steering pump filter. I plan flush the hell out of the system and used > rack. > > > > I really have no complaints with my front end, everything seems tight, > brakes are fresh, calipers new, brake fluid flushed. > > > > Is there anything I should take care of while I have things tore up in the > front? Any other bushings I might wanna knock out while I'm in there? I > understand I'll need an alignment when I'm finished up. Can any shop do > this or should I call ahead and warn them I have a Vanagon? > > > > Thanks for your continued input, basically you all are my e-mechanics! > > > > Ryan > > > > Ooh I'm getting my driveway paved this week, no more rolling in gravel! > > _________________________________________________________________ > The New Busy is not the too busy. Combine all your e-mail accounts with > Hotmail. > http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID283 > 26::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4= > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.830 / Virus Database: 271.1.1/2969 - Release Date: 06/28/10 > 14:35:00
Have something to add on this topic today? Revive this thread in the forum »