hello vanadudes... I have just installed cruise control on my 1984
westy with a bostig conversion.. i used components from a 1990 carat.

drove around the block and tried it a few times and it is not working :
(..

opened up the bently page section 27.29 and started trouble shooting.

it passed the first 2 tests... on test #3 the vacume vent valves. it
says to conect  the test light between 1 and 3 of the harness
connector. at this point with the ignition and cruise to on position
my test light should light up and once i press the brake and clutch
the light should go out, if so it passes.... well the proble is i
don't get a light.. and it doesn't say what to do in this situation...

anybody have a suggestion?

don't worry i tested the test light and it is working flawlessly

thanks
Jay