Well..... did you remember to put the ignition in the "on" position?

And did you slide the cruise control switch to it's respective on positon?

lt won't light if the above 2 items are not done.

Steven

On Fri, Jul 16, 2010 at 2:25 PM, Jay lefstein <jleftbrane@gmail.com> wrote:

> hello vanadudes... I have just installed cruise control on my 1984
> westy with a bostig conversion.. i used components from a 1990 carat.
>
> drove around the block and tried it a few times and it is not working :
> (..
>
> opened up the bently page section 27.29 and started trouble shooting.
>
> it passed the first 2 tests... on test #3 the vacume vent valves. it
> says to conect  the test light between 1 and 3 of the harness
> connector. at this point with the ignition and cruise to on position
> my test light should light up and once i press the brake and clutch
> the light should go out, if so it passes.... well the proble is i
> don't get a light.. and it doesn't say what to do in this situation...
>
> anybody have a suggestion?
>
> don't worry i tested the test light and it is working flawlessly
>
> thanks
> Jay
>