Very clean and purdy.  I repainted my steel engine parts in a very similar
fashion and the POR has held up very well.

Tell us more about the paint scheme of the van that it went into?  That
green sure isn't a stock Vanagon color...  One or the other might be OK but
the two colors together must be quite "stunning";-)

Andrew

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Frank Condelli
Sent: Thursday, July 29, 2010 4:23 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Rebuilt engine project

Just wanted to show you all the beautiful 1.9  engine project I just
finished for a customer.  Engine fully rebuilt,  all rustable metal parts on
the
engine were POR-15ed and a 2.1 stainless steel  exhaust system was fitted.
Modifications of the muffler heat shield and  thermostat housing heat shield
were necessary to fit the 2.1 system.  See  photos here >
_http://picasaweb.google.ca/FCondelli/RebuiltVanagonEngineProject#_
(http://picasaweb.google.ca/FCondelli/RebuiltVanagonEngineProject#)

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://frankcondelli.com/trainsal.htm) )
_Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://frankcondelli.com/exhaust.htm)
_BusFusion_ (http://www.busfusion.com/)  a VW Camper  camping event,
Almonte, ON, June 10 ~ 13,  2010