| Subject: | Re: Hose ID: Crossover tube to expansion tanks? |
| From: | neil n |
| Date: | Thu, 29 Jul 2010 13:24:28 -0700 |
Thanks Alan and Larry. Yup. In Canada. My iMac calculator sez .25" = .64 cm (rounded off) I'm wondering if when I installed the hoses, I didn't pull the cable straps too tight causing end to crack. On Thu, Jul 29, 2010 at 1:00 PM, Larry Alofs <lalofs@gmail.com> wrote: > Seems to me that I used 1/4 inch. �It's easier to find at FLAPS here > in the states. �Are you in Canada? > > Larry A. > > > On Thu, Jul 29, 2010 at 2:23 PM, neil n <musomuso@gmail.com> wrote: >> Hi all. >> >> Am short of time. In the middle of minor hose re-do at tank stopping >> minor seeping at 1 or 2 hose connections. >> >> '81 Vanagon. >> >> 5mm ID low pressure braided currently installed. Is this the correct >> size? End was cracked pretty bad. Only 2 YO. Cable straps were used. >> >> I have 7mm hose on hand if thats a better fit. (though it slips very >> easily over nipples) >> >> Thanks! >> >> Neil. >> >> -- >> Neil Nicholson '81 VanaJetta 2.0 "Jaco" >> >> http://tubaneil.googlepages.com/ >> >> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines >> > -- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
Have something to add on this topic today? Revive this thread in the forum »