

| Subject: | Re: Mystery engine cutouts |
| From: | Mike \"Rocket J Squirrel\" |
| Date: | Fri, 6 Aug 2010 13:24:05 -0600 |
Loren Busch wrote: > Mike, your description comes very very close to describing "Vanagon > Syndrome" or as VW described it in their service bulletin > "Intermittent Driveability Issues". That or a bad/intermittent > electrical connection. Next time this happens try pulling over, > shutting the engine off and then back on again. With Vanagon > Syndrome this resets the ECU and things should then be normal for > from five seconds to five years, that's why it's called intermittent. > Thanks, Loren. I did, at one point, turn off the engine to get some groceries. This did not fix the problem - it reoccurred on the next climb, which was the last climb of the day. Zolly wrote: > I had cut-outs when my fuel pump got too warm. Apperently the > brushes when they are too old, barely touch the rotor to give juice. > Your case feels to be something else though. Thanks, Zoltan -- why does it feel different? The mixture meter showed a fully-lean condition during shut-down which had me wondering about a plugged fuel filter, but I could not see a way for it to unplug itself, reliably, after 3 to 4 seconds of pluggedness. That said, it's not clear to me why the fuel pump would only pick times when I was driving steadily at 3,000 - 3,800 rpm, on an uphill to take a break. Although, with an AT, it's possible it was shutting down on the flats, too, and I might not see it, although I was paying close attention hoping to catch it in the act. -- Rocky J Squirrel
Have something to add on this topic today? Revive this thread in the forum »