So, contrary to logic, or at least mine, the pin comes out downward?  I've
gotten the plastic cover off, but the pin looks to be pretty much the same
size at either end.  Do you recall using a drift punch or a vise or
something else?

Thanks,

Karl Wolz

|-----Original Message-----
|From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
|Jim Johnston
|Sent: Saturday, August 07, 2010 8:29 PM
|To: vanagon@GERRY.VANAGON.COM
|Subject: Re: shifter ball and cup - cuup removal
|
|If memory serves me right, you have to clean out all the grease t in the
|side that holds/guides the ball...
|
|You'll see there's a plastic piece/cover you can work out with a awl...
|
|Then you can tap out the pin..
|
|Hope that makes some sense...
|
|
|Jim
|Wilmington, NC
|
|
|On Sat, Aug 7, 2010 at 10:29 PM, Karl Wolz <wolzphoto@q.com> wrote:
|
|> Bentley doesn't say mucha bout driving out the pin that holds the cup to
|> the
|> end of the shift lihkage.  Anyone have any advice on removing the cup?
|>
|>
|>
|> Thanks in advance,
|>
|>
|>
|> Karl Wolz
|>