At 06:27 PM 8/9/2010, Courtney Hook wrote...
>Alright, I've gotten every CV joint allen head out except for one on
>the stub end.
>So what's number 5??

If you've got access with vice-grips, you've got enough room to take a
dremel to it. Use either grinder bits or cutoff wheels, and remove the
bolt head. If you can get to it with a full size angle grinder, all the
easier. The CV should then just pull straight off, and at that point
I'll bet the remainder of the bolt will twist out easily with pliers.

I'm guessing you removed the whole bearing housing from the trailing
arm to get access? (or is this on a breadloaf? I'm responding on to the
post to the Vanagon list, but saw you posted over on T2, too)