Hi Frank.

Thanks. Neat solution. Good tip!

To all, FWIW, I loosened the LH thread fitting at main valve,
**slightly** turned regulator CW ( when looking toward Westy front)
and get the cover off. Yes this twisted the copper lines a little, but
no more than what one would do if checking pressure by undoing one of
the copper lines. This provided *just* enough room to get at adjuster
screw.

Neil.

On Thu, Aug 12, 2010 at 2:57 AM, Frank Condelli <RAlanen@aol.com> wrote:
> In a message dated 11/08/2010 6:16:18 P.M. Eastern Daylight Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
> � � � �Neil, correct, BUT, you can �orient it temporarily so the
> adjustment is pointing down and the vent �horizontal. �It will not be a problem. �I
> have done this many time and �currently have it that way on my van as I too
> am testing different propane �pressure settings to see what effect it has on
> the fridge operation. �I �have a fairly new, one year I think, Marshall
> Brass 290 and have now screwed in �the adjustment screw two full turns and the
> fridge seems to be operating �better. �I will know more after this weekends
> adventures at BOTC.
>
>>>>>Seems it's installed this way so vent faces �down.<<<<<
>

-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines