I happen to have recently acquired a set from my brother Alan on the
list. If you want, I will trace or scan them and send you the results.
I can mike the metal and tell you the thickness.

Jim

On Wed, Sep 15, 2010 at 8:38 PM, Peter Lapp
<carrothospital@googlemail.com> wrote:
> I've got the entire cabinet section out of my Westy right now to treat the
> small bit of rust that's behind the stove section. When I removed the
> propane lines and the water tank, I unscrewed the metal plates from the
> bottom of the van and found the foamish gaskets falling apart. Does anyone
> know where I can get these or have any advice on what sort of material I can
> use to make my own(and where to get it)? I've searched the normal avenues of
> Bus Depot, Vanagain, Gowesty, etc.
>
> Also, I'm going to replace the stock fiberglass insulation behind the fridge
> with something that won't absorb moisture. Does anyone have any advice on
> this? I've heard of people using closed cell foam and a few other things,
> but I'm not sure where to get any of this stuff.
>
> If you have any advice for this, I'd appreciate it!
>
>
> -p
>