I added 12V to the "S" pin as Dave B said.

The good - The radio fired up!  Ironically the anti-theft radio did not display "SAFE" and appears to need no code. 

The bad- no sound? I have speakers hooked up, but I am getting no sound - with Cassette or radio.  I stuffed a wire in the antenna slot and scan does stop eventually on a station, but no sound.  

One of the pins is labeled with a speaker looking icon and +, perhaps that needs 12V as well?

I have a overnight business trip, so to be continued....

John Reynolds
LiMBO

--- On Sun, 9/26/10, David Beierl <dbeierl@attglobal.net> wrote:

> From: David Beierl <dbeierl@attglobal.net>
> Subject: Re: Trying to get radio to safe mode
> To: "John Reynolds" <transporterjr@YAHOO.COM>
> Cc: vanagon@GERRY.VANAGON.COM
> Date: Sunday, September 26, 2010, 3:26 PM
> At 07:28 AM 9/26/2010� -0700,
> John Reynolds wrote:
> > I have speakers hooked up and power to the pin that is
> indicated with a sun icon as well as the main power and
> ground.� You can see pics of the radio,
> 
> John, you need a constant +12v on pin 'S'.� Rather
> than mess with the plug, I used #30 wire-wrap wire to jumper
> the +12 and S pins down inside the bottom of the
> receptacle.
> 
> I had to google around for what buttons to push to get to
> SAF.� Of course I didn't write it down, what could I
> have been thinking of? :-(
> 
> Unlikely that 1111 will work, though.� As someone
> said, for at least some of these radios the parts people can
> either supply the code or generate a new one, I forget
> which.
> 
> Yours,
> David 
>