I really just grease up the seat tracks (both on the seat and on the base),
i disassemble the swivel base, grease accordingly, and keep going. Just
smear some grease on stuff. What kind?
Grease.
I believe it's synthetic Moly that I use, but it's what i use for just about
everything (shift bushings, rust prevention, etc).
(NOT CV GREASE! THAT STUFF IS A MESS WAITING TO HAPPEN!).

Just apply some lube.

-craig

On Sun, Sep 26, 2010 at 10:23 PM, Mark Hineline
<hineline@ocotillofield.net>wrote:

> As a clarification, there are the following moving parts in a Vanagon
> seat:
>
> 1. The tracks
> 2. The mechanism that releases and locks fore and aft movement on the
> tracks
> 3. The backrest pivot
> 4. The mechanism that releases and locks the backrest pivot
> 5. The seat swivel (if installed)
> 6. The mechanism that releases and locks the backrest pivot
> 7. The pivots for the armrests
> 8. The rods on which the headrest sits and adjusts
>
> I suspect that grease on some these parts would not be advised.
>
> Mark
>