Heater/rad hose routinely deals with 220 degree F. coolant which is the same
temperature as the block, so I don't see any issues.

On Tue, Oct 19, 2010 at 3:58 PM, neil n <musomuso@gmail.com> wrote:

> Hi all.
>
> I'm thinking of protecting these wires (pic):  *http://tinyurl.com/282asu9
> *from stray spark plug wire high voltage. Wrapping them would mean taking
> the harness off engine.
>
> Gates website shows standard rad hose and heater hose can handle up to,
> occasional, 125F. My gut tells me it would might melt or deform if actually
> contacting the block but.....
>
> Is there a risk of heater hose, or standard rad hose igniting if up against
> or very near the engine block?
>
> I'm leaning towards yes, but more knowledgeable people might know for sure.
>
>
> Thanks!
>
> Neil.
>
> --
> Neil Nicholson '81 VanaJetta 2.0 "Jaco"
>
> http://tubaneil.googlepages.com/
>
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>

--
Jake

1984 Vanagon GL 1.9 WBX 'The Grey Van'
1986 Westy Weekender/2.5 SOHC Suby 'Dixie'

Crescent Beach, BC

www.thebassspa.com
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27