Bry...

You asked R&R time, not R&R + repair time. I can have the dash and the
heater assy in my hands at the boneyard in about 45 minutes. There's
just not that much to it.  (4 screws, a multi pin connector
(instruments), 10 screws, 2 bolts, a few wires, the heater knobs
(dash) followed by four screws, two hoses and couple more wires
(heater assy)) You might consider spending $25 at the local pick n
pull for a 2nd heater assy.  Rebuilt it at your leisure. Install in an
afternoon AND see exactly how it comes apart on a rig you don't have
to drive tomorrow!

Jim

On Oct 23, 2010, at 11:25 AM, B Feddish wrote:

>
> It's 65 degrees here in SE PA and will be in the 70's tommorow. I'm
> contemplating doing my dash removal for the leaking heater core and
> burned out fan.  What is the ballpark estimage for the R&R of
> these?  Is it a 2 day job? If so it will have to wait but if I can
> get it done in a day I might try.
>
> A film would follow....
>
> Thanks,
> Bryan