Karl,

I did the same thing--regrounded the pump--and the results were so
dramatically different that I had to re-aim my squirters because the
fluid shot way over the top of the van.

Either that pump is bad or you have an obstruction, I think.

Jim
>

>
> Question 2 - I have replaced the original ground wire and grounded the pump
> to the frame, using one of the washer bottle bolts. �Could this be
> problematical so far as current getting to the motor?
>
> Karl Wolz
>
>
> |-----Original Message-----
> |From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> |Scott Daniel - Turbovans
> |Sent: Tuesday, November 02, 2010 1:24 PM
> |To: vanagon@GERRY.VANAGON.COM
> |Subject: Re: Fun with fixing up stuff...(long post)
> |
> |a good washer nozzle clearing tool is a welder's tip cleaner set.
> |
> |folds up in a little metal box..
>