I'll try it and report back, but will the test after that require finding 50 ft. of shoreline and a left-handed skyhook?
�
Stephen

--- On Tue, 11/16/10, mark drillock <mdrillock@cox.net> wrote:

From: mark drillock <mdrillock@cox.net>
Subject: Re: Turn signal indicator troubleshooting
To: "Stephen Grisanti" <bike2vcu@YAHOO.COM>
Cc: vanagon@GERRY.VANAGON.COM
Date: Tuesday, November 16, 2010, 11:42 AM

If you would be willing to do one more thing, try unhooking the small 
blue wire from the alternator and then run the first 2 test modes again.

The TS indicator is a green led, the HB indicator is normally an 
incandescent bulb with a blue plastic cover. The bulb has no polarity 
but the led needs to be plugged in correctly.

Mark

Stephen Grisanti wrote:
> That may be, but it worked until just recently and that LED was never touched; only the high-beam LED was replaced in July and the turn signal indicator was working before and after.� Guess I'll tweak that and see if it remedies the situation.� Thanks for the input.
>
> Stephen
>
> --- On Tue, 11/16/10, mark drillock<mdrillock@cox.net>� wrote:
>
>
> From: mark drillock<mdrillock@cox.net>
> Subject: Re: Turn signal indicator troubleshooting
> To: "Stephen Grisanti"<bike2vcu@YAHOO.COM>
> Cc: vanagon@GERRY.VANAGON.COM
> Date: Tuesday, November 16, 2010, 11:06 AM
>
>
> Well, it looks like someone inserted the led for the turn signal
> indicator backwards in the cluster led socket.
>
> Mark
>
> Stephen Grisanti wrote:
>> Okay, here's what I discovered in my early morning attempt to figure this out...
>>
>
>
>
>
>